ITEM
Defau Description
Status
lt
Setti
ng
SW NO
Software Version
OK
DATE
Date and time of software releasing
OK
Project Name
Module name
OK
SIACP VERSION
SIACP VERSION
OK
Chassis
MS306 Chassis name
OK
PANEL NAME
P/N of panel
OK
NG
PROJECT ID
>>>
Select panel ID Number
OK
CONFIG
>>>
Project Select submenu
USB UPDATE
>>>
USB UPDATE
ok
HOTEL ENABLE
HOTEL MENU SWITCH
NOT
OFF
USE
ReloadEFBItem
Do
Only for factory adjust
OK
CONFIG submenu
ITEM
Default
Description
Status
Setting
Erase HDCP Key Do
Only for R&D
OK
Reset HDCP Key Do
Only for R&D
OK
UsbHdcpkey
Do
Only for R&D
OK
Update
USBPortNumset 1
USB port number set (1 or 2)
OK
5. Debugging
5.1. General Steps of debugging
According to the requirement of the order, below steps are needed
for appropriate setting.
1) Enter the Factory Menu, enable FAC HOTKEY.
2) Check Project ID and the version of software, release date
displayed at the bottom of Factory Menu.
3) Enter Design Menu, choose SERVICE MENU->Project ID, choose
corresponding Project ID number of the product (Refer to the
“V6-PROJECT -ID0**”in the BOM list).
