
49
This setting corresponds to the number of credits given when a set
dollar amount is put in the machine. For example: you want to set 8
credits (punches) for $5 (5*4=20 quarters), you should adjust this
setting to indicate 20-8 as shown.
The values can be set using
START
and
GAME
buttons. As
shown,
START BOXING
sets the left value and
GAME
sets the
right value. Repeat the procedure for
‘P 6’
but remember to set the
bonus for a larger amount of money than in ‘
P 5
’. Example could be
for $10, 20 credits (10*4=40, so the setting is 40-20)
.
If you get too
far while increasing these values you must continue going up to 100
before you again end up at single 0.
To leave the settings mode simply turn the DIP switch #1 to off
(left) position. The machine should reset and be ready to go.
SW1
SW2
Summary of Contents for Comboboxer
