
20
P01
TEMPORARY COUNTER OF POINTS.
1 POINT = $.25 (25
CENTS)
.
YOU CAN RESET IT TO 0000 BY PUSHING AND HOLDING
THE "START BOXING" BUTTON FOR 3 SECONDS.
P02
COUNTER OF POINTS. THIS IS LIFE LONG - NOT
ERASEABLE.
P03
ELECTRONIC COUNTER OF REVENUE (COUNTS THE
QUOTERS WHILE THE MECHANICAL COUNTER IS
DISCONNECTED).
P04
CREDIT RATIO. HOW MANY QUARTERS ($.25) IS NEEDED
FOR 1 CREDIT.
THE LEFT SIDE OF THE RATIO IS CONTROLLED BY THE
“START BOXING” BUTTON.
Example: 1 credit is worth four quarters ($1), so the P04 will be set to
4 - 1.
1 credit is worth two quarters (50 cents), so the P04 will be
set to 2 - 1.
NOTE: IF THE BILL ACCEPTOR IS SET 4 PULSES FOR A 1$,
SET P09 TO 12 (in case of the older software to 5).
P05
YOU CAN SET ADDITIONAL CREDITS (BONUS CREDITS)
WHEN A SET DOLLAR AMOUNT IS INSERTED. USING THE
“START BOXING” BUTTON YOU CAN ADJUST HOW MANY
QUARTERS RECEIVED AT ONCE WILL GIVE THE BONUS.
USING THE “SELECT GAME” BUTTON YOU WILL THEN
ASSIGN NUMBER OF CREDITS FOR THE RECEIVED
AMOUNT.
Example: you want to set 8 credits (punches) for $5, you should set
P05 to 20-8.
NOTE: SEE SETTING P65
.
P06
THIS SETTING FUNCTIONS THE SAME AS P05
BUT ALWAYS
FOR BIGGER VALUE OF THE BILL OR COIN THAN P05.
Example: if you want to set 8 credits (punches) for $5, you should set
P05 to 20-8.
if you want to set 18 credits (punches) for $10, you should
set P06 to 40-18.
NOTE: SEE SETTING P65
.
Summary of Contents for Comboboxer
