background image

I General User Manual 

 

  33

Operating the front derailleur lever with trimming  
(noise prevention), optional

Gear shifting operations

Lever 

a

: Shift to a larger chainring

Lever 

a

Starting position 

of lever 

a

Gear shift com-

plete stroke

Actual pull

 

If the lever movement does not effect a full changeover of chainring, 

press the lever repeatedly by the amount (X') to move the lever the 

remaining distance (X) and change gears.

Lever 

b

: Shift from intermediate chainring to smallest 

chainring

Lever 

b

Starting position 

of lever 

b

Gear shift complete 

stroke

Click-in position

Click-in position

 

When lever 

b

 is operated, there is one click where trimming (the 

noise prevention mechanism) enagages, and a second stronger click 

when the gear shift stroke is completed. After trimming, the next 

push will complete the gear shift stroke.

Trimming (noise prevention)

Depending on the position of the chain after shifting, it 
may rub against the outer chain guide plate or inner chain 
guide plate of the front derailleur and produce noise. In 
this case, lightly press lever

 a

 or lever 

b

 to move the front 

derailleur until it is no longer in contact with the chain.

This procedure is known as "trimming". Trimming is pos-
sible if the chain is on the large, intermediate or small 
chainring. 

If you perform the trimming operation at one of the fol-
lowing positions, the noises will disappear completely.

Summary of Contents for Pedelec Impulse







































































































































































































































Reviews: