Installation
ProLine 2200 User’s Manual REV N
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
3-17
Torch Coolant Requirements
Note: Refer to the supplier’s most current Material Safety Data Sheet for
information regarding safety, handling, and storage of
torch coolant.
The ProLine 2200 system is shipped without torch coolant in the reservoir.
Coolant must be added before applying power to the system.
Only use
Kaliburn approved torch coolant solution for optimal system performance as
commercially available antifreeze contains corrosion inhibitors that will damage
the cooling system. The standard coolant solution consists of 25% industrial
grade propylene glycol and provides freezing protection down to -13º C (9º F).
The standard solution can be ordered in one-gallon containers, PN 500695. For
operating temperatures below -13º C, a 50% solution of industrial grade
propylene glycol can be ordered in one-gallon containers, PN 500895, providing
protection down to -36º C (-33º F).
Failure to use the proper propylene glycol
solution may result in cooling
system and/or torch damage
.
The torch coolant should be flushed out of the ProLine system every six months
and replaced with new coolant. The water filter/deionization cartridge should also
be changed at the same time. See Section 5 for details.
