18
TROUBLESHOOTING GUIDE - STATUS DISPLAY CODES
FAULT CODE
POSSIBLE CAUSES
SUGGESTED ACTION
Baffle Filter
Missing
Missing Filters. Duct air
pressure ports blocked.
Install missing filters. Check air pressure ports inside
of the duct for any obstruction. If necessary,
disconnect the air line via push-to-fitting to clear
blockage. Reinstall the air line making sure it’s fully
seated within the fitting.
HEPA or Pre-Filter
Missing
Missing Filters. Duct air
pressure ports blocked.
Install missing filters. Check air pressure ports
inside the hood for obstruction. If necessary,
disconnect the air line via push-to-fitting to clear
blockage. Reinstall the air line making sure it’s fully
seated within the fitting.
Carbon Filter
Missing
Missing Filters. Duct air
pressure ports blocked.
Install missing filters. Check air pressure ports
inside the hood for obstruction. If necessary,
disconnect the air line via push-to-fitting to clear
blockage. Reinstall the air line making sure it’s fully
seated within the fitting.
Front Filter
Access Panel
Open
Panel missing or not in-
stalled properly
Check front filter access panel to make sure it’s
installed properly
Rear Filter Access
Panel Open
Rear filter access panel
not closed
Confirm rear filter access panel is closed and latched
properly
Motor Overload
Blower Intake Blockage Disconnect all power. Inspect blower intake to make
sure no objects are preventing blower wheel from
turning.
Low Air Flow
Clogged Filters
Inspect and replace dirt filters
CPU Battery Low Bad Battery
Contact Kaliber Innovations LLC for replacement
Fire Suppression
Not Ready
Fire Suppression Not
Setup
Contact Kaliber Innovations LLC or Buckeye
Authorized Dealer to inspect and charge system.
DO NOT tamper with the fire suppression system.
