32
Error code Cause
Solution
15A
Incorrect
ionisation signal
Contact your installer.
08A
Lack of ionisation
detection during
ignition
If a flame is visible during ignition:
Check that there is no contact between the
ionisation rod (the || symbol on the burner) and
the Kal-Glow or the furnishings in the fire.
Check that the cable is correctly plugged into
the technical unit (see ‘ionisation’ in section 20:
Wiring diagram).
If the error code still displays, contact your installer.
The ionisation cable may be damaged or
improperly connected to the ionisation rod.
