Kalfire G Series, User Instructions

Page: 20 / 40

20
desired “P” programme is displayed.
3. Wait until the home screen appears.
4.11 Activating/deactivating
the hybrid LED lighting and
adjusting the lighting intensity
If the gas fire is equipped with hybrid
LED lighting, it will be automatically ac-
tivated as soon as the fire is turned on.
The number of horizontal bars at the
bottom of the screen indicate the level
of brightness of the LED lights. LED
lighting can also be activated when the
fire is not on. Carry out the following
steps to activate only the LED lighting:
1. Press
to turn on the screen.
2. Press the right button until “P1, P2
or P3” appears in the centre of the
screen.
3. Press to activate the LED ighting
or increase its intensity.
4. Press to deactivate the LED
at identical switch-on times.
17. Press P to exit the programme.
18. The
and icons on the remote
control indicate that the time seg-
ments have been programmed.
4.10 Programme choice for the
hybrid LED lighting
If the gas fire is equipped with a hybrid
LED lighting function, it is possible to
vary the lighting effects. The different
parameters controlling the LED lighting
allow the oscillation, intensity and co-
lour to be set. In every programme, se-
lection of the word “AUTO” provides the
highest and clearest lighting intensity.
Carry out the following steps to adjust
the LED lighting programme:
1. Press the right button until a “P1,
P2 or P3” appears in the middle of
the display.
2. Press a number of times until the
Table: LED programme
Programme Reacts to Light clear variation
P1
Setting AUTO and Modulating
between high and low
10% to 90%, fading reddish LED
colour.
P2
Setting AUTO and Modulating
between high and low
10% to 90%, yellowish and reddish
LED colour, alternately on the
left and right-hand sides of the
appliance.
P3
Setting AUTO and Modulating
between high and low
Combination between Programme
P1 en P2