Kalerm KLM1601, Service Manual

Page: 75 / 96

Repair
4. Put the already installed epicyclic gear
frame A into the gearbox, put 1 filler piece
onto epicyclic gear frame A. 5. Put the already installed epicyclic gear
frame B into gearbox.
4 5
6. Put the steel ball support and 34 roll steel
ball into gearbox. 7. Install 3 grinder antivibration pads and 3
antivibration bushes into coffee powder
container.
6 7
8. Install the coffee powder container into the
gearbox, the bigger hook on the coffee
powder container should compare to the
bigger groove. Screw tightly.
9. Install the line pencil into the grinder motor,
red line correspond to the red mark.
8 9
1
Note: The installation direction for
the grinder antivibration pads and 3
antivibration bushes.
73