Kalerm KLM1601, Service Manual

Page: 69 / 96

67
Repair
7. Install the ceramic plate A into the
dispenser valve. The upper side should be
the side of slot, and it should be covered
with oil(SYN-setral-Al/C 2-FD). 8. Install the ceramic plate B into the
dispenser valve. Both sides should be
covered with oil((SYN-setral-Al/C 2-FD).
7 8
9. Install the seal on the dispenser valve
top cover. 10. Assemble dispenser valve top cover and
water distributor together.
9 10
11. Put the dispenser valve silicon plate into
the slot of the water distributor. 12. Assemble the ceramic plate C on
dispenser valve silicon plate, the smooth side
should be covered with oil(SYN-setral-Al/C
2-FD).
11 12
1
1
1