Kalerm KLM1601, Service Manual

Page: 71 / 96

69
Repair
2. Install the coffee brewing unit into the
brew unit frame, and install reset base and
connect part.
2
3. Assemble the pin seal and pin together
to drainage valve connection. Note: the
direction of the pin seal. 4. Coating the contropistone seal with
lubricating oil(SYN-setral-Al/C 2-FD) and
install to the contropistone, and then lock
the filter screen.
3 4
5. Assemble the connector, ball and
spring into contropistone. Pay attention to
the arrow direction. 6. Assemble the already installed
contropistone into the brew unit frame.
Note: The direction of the contropistone
should be the same as the picture showed.
5 6
1