LDM 500-60 ENGLISH
© KALEAS GmbH & Co. KG
29
Continuous measurement
With continuous measurement, a measurement series is determined
sequentially, and the maximum and minimum values of the series
are dis-played. To do so, move the meter along a base surface or
edge from which you want to measure the distances. You can use
this, for example, to check the parallelism of opposing walls or
measure extreme values when using a function.
Die continuous measurement will end after 60 s automatically.
>2 s Laser [B] is activated,
the meter starts the continuous measurement.
Display [8]
Display [4]
Current measured value
Display [2]
Max. measured value
Display [3]
Min. measured value
1x
short
End continuous measurement.
Measured value functions
The LDM 500-60 offers integrated functions to make further pro-
cessing of measurement results easy.
You must select the desired function prior to each measurement.
If the same function is to be carried out repeatedly, you only need
to press the corresponding button again 1 time.
Surface area
1x
short
Laser [B] is activated, meter is ready for measuring.
Display [6]
, the corresponding line is flashing.
1x
short
Measuring length
1x
short
Measuring width
Display [4]
Surface area (length x width)
Display [2]
Length
Display [3]
Width
