KALATEL DSR-1000eZ User Manual Download Page 30

Page: 30 / 72

Kalatel DSR-1000eZ

3-8

0150-0238B

Advanced Menu

→

Languages

Use this menu to select the language the DSR will display.

Advanced Menu

→

Firmware Upgrade

Use this menu to Flash upgrade the DSR via the RS232 Serial port. The preferred method to upgrade
the unit is via the ethernet using the built-in WaveBrowser (See section 6).

Firmware Upgrade

WARNING!!! Do not power off unit until the operation is done,

Do you want to continue?

[OK]

[CANCEL]

To upgrade the DSR from this menu requires the following items:

•

A PC connected to the DSR via the serial port with a null modem cable.

•

The WinFlash program.

•

The upgrade file.

For further information and for obtaining the upgrade files and WinFlash program please contact GE
Interlogix Technical Support at 1-800-469-1676.

English

French

Summary of Contents for DSR-1000eZ









































































Search results

Summary of Contents for DSR-1000eZ

Reviews:

Related manuals for DSR-1000eZ

Brands by name

Popular brands

KALATEL DSR-1000eZ, User Manual

Search results

Summary of Contents for DSR-1000eZ

Reviews:

Related manuals for DSR-1000eZ

Brands by name

Popular brands