Kalatel DSR-1000eZ
2-4
0150-0238B
2.3 The Search Interface
SEARCH
The Search Interface feature allows the user to search the hard disk for recorded
events, such as an alarm condition, or a previous recording session. For example,
each time Record mode is activated, it is considered a separate recording
session.
To enter the Search Filters menu, press the
Search
button. The Search Filters
menu is displayed on the primary monitor.
Search button
Search Filters
Start
DATE: 12/25/00 [ ]
(MM/DD/YY)
Stop
01/01/01 [ ]
(MM/DD/YY)
Start
TIME: 11:11:21 [ ]
Stop
12:34:34 [ ]
1 2 3 4 5 6 7 8
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ]
ALARM: [ ]
Use this to specify:
•
The Start and Stop date of
the search.
•
The Start and Stop time of
the search.
•
Which cameras to search
exclusively.
•
To search for recorded
alarms.
[CANCEL]
[START SEARCH]
Searching for All Recorded Events
Using the
Shuttle
to navigate, highlight
[START SEARCH]
, then press the
Enter
button. The Search
Results window will appear. For information about selecting a recorded event, see
Selecting from
the Search Results
, in this section.
2.4 Specifying Search Parameters
Selecting a Start and Stop Date
1.
Using the
Shuttle
to navigate, highlight the
DATE
parameter, then press the
Enter
button. The
unit will enter Edit mode.
2.
Use the
Jog
to change the start and stop date values. Use the
Shuttle
to navigate among the
different parameters.
3.
To activate the start or stop date parameter, use the
Jog
to place an
[X]
in the check box.
4.
Press the
Enter
button at any time to exit Edit mode.
Selecting a Start and Stop Time
1.
Using the
Shuttle
to navigate, highlight the
TIME
parameter, then press the
Enter
button. The
unit will enter Edit mode.
2.
Use the
Jog
to change the start and stop time values. Use the
Shuttle
to navigate among the
different parameters.
3.
To activate the start or stop time parameter, use the
Jog
to place an
[X]
in the check box.
