KALATEL Calibur DVMRe, User Manual, Page: 47 / 80

0150-0138D 47 Calibur DVMRe
Example of Record Lists:
No Change record list for 8 cameras, Camera-4 in alarm. 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Exclusive record list for 8 cameras, Camera-4 in alarm. 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Interleaved record list for 8 cameras, Camera-4 in alarm. 1 4 2 4 3 4 5 4 6 4 7 4 8 4 1 4
Main Menu
→
Alarms
→
Enable / Disable
Individual Enable
Enable All
Disable All
Exit
Use this menu to Enable or Disable the alarm inputs. Select from the
following.
• Enable All
• Disable All
•
Individual Enable: Allow the user to access the Alarm Enable
submenu, and enable or disable alarm inputs on a per camera basis.
Alarms Enable
Use the Up/Down Arrow buttons to navigate, and the Left/Right Arrow
buttons to change the values.
Save changes and exit the menu: Select [OK] , then press the Enter
button.
Exit the menu without making changes: Press the Menu button, or
select [CANCEL] , then press the Enter button.
Alarm 01: ENABLE
Alarm 02: DISABLE
Alarm 03: ENABLE
Alarm 04: DISABLE
:
Alarm 15: ENABLE
Alarm 16: DISABLE
[CANCEL] [OK]
Main Menu
→
Alarms
→
Alarm History
Alarm History Box
001- 02/04 18:40:32 16
002- 02/15 12:00:10 11
003- 02/28 10:10:20 08
:
:
010- 03/15 05:12:16 04
[OK]
Use this window to view a list of the 100 most recent alarms. Alarms
are displayed 10 at a time. Use the
Arrow buttons to scroll through
the alarms.
Information displayed in this window is:
•
The alarms number in the list.
•
The date of the alarm (month and day).
• The time of the alarm (hours, minutes, and seconds).
•
The number of the camera input in alarm.
Main Menu
→
Alarms
→
Link To A Macro
Macro Link List Setup
Use this menu to link an alarm input to a macro. If a link is created,
a macro will run each time that alarm is activated.
Alarm: Select the alarm input you would like to link.
Macro: Select the macro number you wish to link to. Leave this
setting blank if you do not wish to link to a macro.
Alarm : 01
Macro : 01
[CANCEL] [OK]
Main Menu
→
Alarms
→
Fullscreen Alarm
Fullscreen Alarm
Selecting Yes from this menu will cause the unit to display the alarm
camera fullscreen. Selecting No from this menu will cause the unit
to display the 4-way display configured in the Main Menu
→
→ →
→
Alarms
→ → → → Alarm Action Setup menu.
Fullscreen :NO
[CANCEL] [OK]
This selection is not available on 4-channel units.