KALATEL Calibur DVMRe, User Manual, Page: 10 / 80

Calibur DVMRe - 10 - 0150-0138D
7. RS-485 Connector: For connecting several units to a single keyboard, or vice-versa.
8. Composite Monitor-A Output: Composite video output with BNC style connector.
9. Camera Inputs: BNC style connector, looping. Auto Terminating.
10. SCSI Port: For connecting SCSI compatible archive devices.
11. Alarm I/O: For connecting alarm inputs, and alarm output relays.
12. Monitor-B Output: Composite video output with BNC style connector.
1.7 Connections
This section contains connection specifications for the DVMRe only. For instructions regarding the
connection of the associated security equipment in your system, please consult the instruction manual
of the associated equipment.
Associated equipment in a typical security system could contain the following items:
• A primary monitor.
• A secondary monitor.
•
A Keyboard.
•
Video cameras: 1 volt peak-to-peak, with composite video outputs.
• Alarm input devices: Pressure sensors, motion detectors, etc.
•
Alarm output devices: Buzzers, Sirens, Flashing Lights, Etc.
•
A PC connected via the ethernet.
•
An external archive device, such as a SCSI CD, DAT, or AIT drive.
Ethernet Port
Wire Type: Cat 5
Connector Type: RJ-45
Max Cable Length: 100 feet / 30.5 meters
Minimum Cable Length: 6 feet / 1.8 meters
Hub Wiring Configuration: Straight Through
PC Wiring Configuration: Cross Over
The cable connection configuration depends on your
network configuration:
•
For a DVMRe that connects directly to a Hub,
use a Straight Through connection.
• For a DVMRe that connects directly to a PC, use
a Cross Over connection.
Consult with you MIS personnel for the specific type
of configuration. See section 7.10 for information
about configuring the ethernet settings in the menu
system.
RJ-45 Pin Configuration For Ethernet Port
Pin Use Pin Use
1 TX+ 5 Not Connected
2 TX- 6 RX-
3 RX+ 7 Not Connected
4 Not Connected 8 Not Connected
8 2 3 4 5 6 7 1
RJ-45 socket on
rear panel.