- 10 -
To control the upper zone temperature, press “UP” or “DOWN” button on the left side. Each press would adjust
the temperature by 1°C between 5~10°C or 1°F between 40~50°F.
To control the lower zone temperature, press “UP” or “DOWN” button on the right side. Each press would adjust
the temperature by 1°C between 10~18°C or 1°F between 50~66°F.
To turn on or off the internal LED lighting, press “LIGHT” button on the right side.
To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press “°C/°F”
button.
Care And Maintenance
Cleaning your wine cooler
Unplug the wine cooler and remove the bottles.
Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.
The outside of wine cooler should be cleaned with mild detergent or warm water.
Draw out the water box at the bottom, and wash it.
Moving your wine cooler
Remove all the bottles.
Securely tape down all loose items inside your wine cooler.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Be sure the wine cooler stays in the upright position during transportation.
Trouble Shootings
You can solve many common wine cooler problems easily, saving you the cost of a possible service call. Try the
suggestion below to see if you can solve the problem before calling the service center.
PROBLEM
POSSIBLE CAUSE
Wine cooler do not operate.
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
Wine cooler is not cold enough.
Check the temperature control setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct
clearance.
The light does not work.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
Vibrations.
Check to assure that the wine cooler is leveled.
The wine cooler seems to make to
much noise
The wine cooler is not leveled.
Check the fan.
