6. Maintenance
53
6.4
Maintenance
1.
The enamelled parts of the Heat Pure can be cleaned using a lint-
free damp cloth. Repair enamel and spray cans can be obtained
from your dealer, if the enamel becomes damaged.
2.
The flue/ chimney should be inspected and swept at least once
every year. Do not use steel brushes on a stainless steel flue duct.
Remove the baffle plate before sweeping to remove the soot and to
ensure the plate is not obstructing the passage during sweeping.
3.
Clean the space underneath the Heat Pure via the convection
gratings at the base. Dust can easily collect here, conveyed by the
convection current.
4.
Make sure the cord in the lower frame is free of ash and soiling.
5.
If the cords no longer seal properly, they can be replaced. Contact
your dealer for assistance.
6.
Treat the chain in the lifting door system each year, by spraying it
with Kal-fire lubrication.
The pane is made from special ceramic glass. This
should not be placed in the bottle bank (recycling
glass). Ceramic glass does not melt in the glass oven
and will therefore cause problems in the glass oven.
Your ceramic glass should be returned to your council
waste tip so that it can be recycled appropriately.
Only use Kal-fire spare parts as replacement parts (if necessary).
These parts can be obtained from your trade dealer.
