2. Safety
2
2
Safety
2.1
CE Quality mark
The appliance has been approved according to CE standard EN-613.
Each appliance that leaves the factory has been tested technically and
for functionality according to the Kal-fire quality standards.
2.2
Safety instructions installer
An authorised installer will connect the Fairo in compliance
with the nationally and/or locally applicable regulations.
Before installation the gas supplies must be installed
according to the prevailing regulations.
In the event of a malfunction you must
never
deactivate,
override or modify the safety features in the Fairo and gas
regulator. Check the Fairo for correct functioning
immediately after installation. The safety features set at the
factory must not be modified.
Take the necessary preventive measures by using non-
combustible material to prevent over heating of floor,
boards or walls close to the Fairo.
If you have intentionally or unintentionally activated the flame
failure device, causing the Fairo to go out, wait for 3 minutes
before re-lighting the Fairo.
