background image

kaivac

cleaning

systems

TM

kaivac

cleaning

systems

TM

P a g e   ǀ  

6

1.3  L

iMited

 W

ARRAnty

 p

RoteCtion

 p

LAn

1.0  Getting Started

5 YEAR TROLLEY/TANK AND 1 YEAR PARTS AND LABOR (EXCLUDING BATTERY)

 Kaivac warrants to the original 

purchaser/user that the vacuum tank and bucket body are free from defects in workmanship and materials under 

normal use for a period of Five Years, and the battery interface and components (excluding Lithium-ion battery), vacuum 

motor, and spray system are free from defects in workmanship and materials under normal use for a period of One Year. 

This warranty does not include accessories or wear items. Items EXCLUDED from coverage: Squeegee blades and wheels, 

hoses, seals, gaskets, cords, casters, HEPA filter cartridges, chemical feed caps, spray gun, GFCI, vacuum wand assembly 

and other accessory tools.

Please Note: 

using inappropriate chemicals constitutes misuse of these machines. These machines are not

meant to be used with high-foaming or corrosive chemicals. Please check with your distributor or with Kaivac

if you have questions about your chemical.

Battery Program Details

Battery Warranty covers 2 years on a defective Battery.

Battery Warranty covers the replacement of the Battery unit.

Battery replacement remains under Warranty only for the remaining Warranty period of the original

Battery unit (for a maximum of 2 years from the date of purchase of the machine.

WARRANTY LIMITATIONS:

This warranty does not assume responsibility for damage or faulty performance caused by misuse or abuse,

or where repairs or modifications have been made or attempted. Kaivac will make the final determination on

whether the damage falls under this limited warranty for manufacturer’s defects.

The following actions constitute misuse or neglect of the battery that void the warranty of the battery:

– Any modifications to Kaivac equipment may nullify any warranty

– Improper installation of the OmniFlex battery box

– Exposure to temperatures above the battery limits

– Use of any charger besides the supplied OmniFlex charger

– Dropping the battery box

– Long term storage of the battery without maintaining a battery charge of 25 to 40% capacity

Under no circumstances will Kaivac be liable for any loss, damage, expenses or consequential damages arising

in connection with the use or inability to use Kaivac’s product. This warranty is in lieu of any other warranty 

expressed or implied, including any warranty of merchantability or fitness for a particular purpose.

T: 

0121 351 4444 

   

E:

 [email protected] 

   

W: 

www. rawlins.co.uk

Summary of Contents for UNIVAC


















Reviews: