KAISHOT
Before you use
4
Before You Use
Cautions
Details
Connect all the
peripherals to the unit
prior to the operation.
Connecting or removing the peripherals during the
operation may cause the damages or troubles.
Check the icon status.
If the wireless module, camera, GPS, or Micro SC Card
has to connect to the unit while the power is on, it takes
some time to be recognized. Use the function after
checking the status of the icon. You will see the error
message when the function is not ready to perform yet.
Refer to the
appropriate section of
the User Manual to
change the Micro SD
Card and follow the
instruction.
When it is not handled accordingly, it may damage the
Micro SD Card, or cause critical system errors.
Do NOT open the side
cover.
It may damage Micro SD Card. Also, it may disturb a
normal recording function, thus recording may not be
stored properly.
Do not support
continuous recording.
When you set up Backup Time with ‘0 min’, it should
support continuous recording. But KAISHOT can record
per one hour separately in order to operate system well
Apply LCD Saving
Mode On.
We recommend that you apply LCD Saving Mode On to
reduce the heat generation and battery consumption as
little as possible. It is set as three (3) minutes by default.
Do NOT separate the
battery from the unit
during operation.
If battery is separated from the unit during operation, not
through the proper steps indicated in the User Manual, it
forcefully turns the system off, thus causing troubles in the
system. If battery is separated in the middle of the
recording operation, it may not store the date recorded.
Please check the
battery capacity.
If remaining battery life is not sufficient, it may forcefully
turn the system off.