12
EN
Handle installation
Models with freezer drawers
Use cross recessed screwdriver to set
the bolts
1
on the door as shown in
the figure. Fix them tight on the door.
Place the handle
2
from above as
per the direction shown at the picture
and hang the handle above on the
set bolts. Using the supplied hexagon
spanner set screws into the threaded
holes and tighten them gently. Ensure
that the handle is well erected.
Models KS 9...
Use cross recessed screwdriver to set
the lugs
3
on the door as shown in the
figure. Turn the screws of the lugs to
tighten.
Place the inner ledges of the fixing el-
ements
4
of the door handle
into the
corresponding slots of upper and low-
er lugs simultaneously and move the
door handle from the bottom up.
Using the screwdriver, turn the keeper
screw under the door handle to tighten.
Ensure that the handle is well erected.
Decorative bar installation
Modelle KS 9...
Install the decorative bar
5
on the bot-
tom panel as shown in the figure. By
means of a cross recessed screwdriver
turn the screws
6
to tighten. By means
of delivered in the complete set screw
caps
7
close openings for screws. Re-
move a protective film from the bar.
5
7
7
3
3
1
2
4
4
6
6
Summary of Contents for KS 9, KK 6
Page 71: ......
Page 72: ...OLAN Haushaltsgeräte Berlin Germany www kaiser olan de ...
