30
EN
MULTIFUNKTION ELECTRICAL OVEN
CONTROL
Oven operation functions are controlled by the
knob
1
operation mode
and knob
2
temperature
control
set up on the control panel.
The graphic symbols on the knobs indicate the
selected operation modes.
To switch off the oven, set up the knob
1
operating mode
and the knob
2
temperature
control
in position «0».
For more comfort, you can use the electronic timer
and automatic programmer
4
, which enables to
run the oven in automatical, half automatical or
manual cycle.
After the selected oven temperature has been
reached, the red control light goes out.
If it is necessary to put the dish into a pre-heated
oven, do it after the red control light has gone out.
The red control light can also be on if the knob is
set in the position to
illuminate
the oven. In
this position, however, the heating element of the
oven is off.
* for models with control electronic timer and programmer
Important!
The activation of the oven is
indicated by yellow
3
and red
5
control
lights.
3
4
5
2
1
1
2
