8
265
665 / 490
2
7
1
1
3
3
5
6
4
EN
Two persons are required for proper installation. A qualified
installer should be commissioned to make the mounting.
Mounting under a wall unit
MOUNTING OF BUILT-UNDER COOKER
HOOD
The cooker hood is mounted in the wall unit.
• Mount the cooker hood
4
on the cabinet
1
by 8 screws
(ST4 × 18 mm) and mount the control panel
3
on the hood
body by two screws(M4 × 10 mm)
• Mount the V-flap
5
on the exhaust outlet of the cooker
hood
6
.
• Saw out in the wall unit
1
an aperture
2
665/ 490 × 265
mm (depending on model).
• For an air extractor mode of the cooker hood make an
opening
7
in the deck of cabinet according with the
drawing.
• If the cooker hood will be operate in odour absorber mode
it is necessary to install charcoal filter (not supplied).
• Detach the control panel
3
by unscrewing the two screws
(M4 × 10 mm).
Attention!
Installation and electrical connection must
be made by a qualified expert only.
A t t e n t i o n !
T h e m a n u f a c t u r e r d e c l i n e s a l l
responsibility for damage or injury if all instructions and
normal safety precautions are not respected.
