SET UP & INSTALLATION
13 - ENG
A
B
A
B
B
A
DRONE / REMOTE CONTROL TRANSMITTER
14 - ENG
To operate your Drone, you must first pair the
Drone to your Remote Control Transmitter before
every flight. Ensure your Drone and Remote
Control Transmitter are fully charged and follow
these steps in order:
1.
Turn on your Drone by holding the power
button for 2 seconds.
2.
The Drone lights will flash indicating it is ready
to pair to a Remote Control Transmitter.
3.
Turn on the Remote Control Transmitter.
4.
Using the Left Throttle/Yaw Stick move it to
the maximum UP position and return it back
to the zero position, you will hear a beep.
The Drone is now paired to the Remote Control
Transmitter.
Calibration
It is important that you calibrate the gyroscope
and compass every time before flying outdoor
To Calibrate;
1.
Place the Drone on level surface
2.
Turn on the Trail Drone & pair with the
controller.
3.
Refer to the next page for Gyroscopic and
Compass Calibration.
