SMARTPHONE FLIGHT OPERATION
25 - ENG
Take the Trail Drone outside
.
Connect your
smartphone to the Trail Drone through Wi-Fi.
Enter the app control interface by clicking the
start flight button on the app.
It is important that you calibrate the gyroscope
and compass every time before flying outdoors.
To Calibrate
Go to Settings (8).
Under Joystick tab, tap on Accelerometer
calibrate, this will calibrate the Accelerometer.
Next, tap on the Magnetometer calibrate.
Now, hold the Drone straight and horizontally
rotate 360° in clockwise direction for 3 times
continuously.
Then hold the Drone vertically with the camera
facing up and rotate 360° in clockwise direction
for 3 times.
Place it on a levelled surface again, LED lights will
flash slowly. Calibration is now competed.
LED lights will become solid once the Drone
received sufficient GPS signal.
Tap on the Settings (8) icon once again to hide
the Settings popup.
It’s time to take off
Ensure the Drone receives GPS signal. (Wait
until the LED lights become solid). You will see
the number of satellites connected to the Drone.
More number of satellites will increase the stability
and position accuracy of Drone.
1.
Tap on the Lock icon (13) to unlock the
Drone.
2.
Once the rotor starts spinning, tap on the
take/off landing button (14) to take off.
3.
Press the controller icon (11) to display
Throttle control and Directional controls on
the screen.
COMBO MODE OPERATION
26 - ENG
Using the Remote Controller & Smartphone
simultaneously
You can use the smartphone for live FPV when
you control the Drone with the remote controller.
Follow the below steps to operate this way;
Attach the Smartphone to the phone holder
and mount it to the remote controller.
1.
Turn on the Trail Drone.
2.
Bind the Remote-Control Transmitter
and the Drone first.
3.
Pair the Smartphone with the Drone.
Please see pairing instruction above.
4.
Once connected open the Kaiser Baas
Trail Drone App.
5.
Click on the Start Flight tab to see the live
FPV of your Drone.
Note: When you are on combo mode, you can
only operate the Drone using the remote control.
Videos/Photos will be saved to smartphone by
default unless you turn the app controls off on the
KB Trail interface. If the SD card is not inserted
when the Drone is connected to smartphone, files
will be saved to the smartphone by default.
