98
www.kaisai.com
EN
6.6 Function Setting
6.6.1 I-KNOW
In the On state, press the i-know button to select the I-KNOW function. To cancel this function,
press the i-know button again.
6.6.2 RAPID
In the On state, press the RAPID button to select the RAPID function. The electrical heater is
started for heat up. To cancel this function, press the RAPID button again. Then electrical heater
is stopped.
Under the E-HEATER mode, users can press the RAPID button to switch to the HOTWATER
mode. To return to the E-HEATER mode, press the RAPID button again.
6.6.3 CYCLE, SUNFLOWER, ABSENCE, and ONCE
In the On state, press the FUNCTION button to enter the interface for selecting among the CY
-
CLE, SUNFLOWER, ABSENCE, and ONCE functions. When a function is selected, the correspond
-
ing icon blinks. Then users can press
▲
or
▼
to start or cancel this function. If no operation is
performed within 5 seconds, it will be regarded that this function is not required. If this function
is started, the function icon is displayed without blinking. If this function is cancelled, the function
icon will not be displayed. If no function is selected in setting interface for 5 seconds, the interface
switches back to the original status.
