Kaisai ICE Series, Service Manual

Page: 116 / 168

 Troubleshooting 9 
5 TP temperature
press "On/Off" for 2s to enter the Max. Set Temperature Selector, press the
Up/Down key to select "25°C~30°C", press "OK" to confirm, and the Max.
Set Temperature can be memorized when the remote control is powered
on and power lost; and press "On/Off" for 2s to exit. When the remote
control does not burn any parameters, the max. set temperature will not be
memorized.(Set within 1 minute after power on)
6
Compressor
Target Frequency
FT
press "On/Off" for 2s to enter the Multi-split Cooling and Heating Preference
Selector, the code displayed is “Ch”, press "OK" to send the Query Multi-
split Cooling and Heating Preference Selector code; press the Up/Down key to
select H (heating preferred), C (cooling preferred) or A (master settings), press
"OK" to confirm; and press "On/Off" for 2s to exit.(Set within 1 minute after
power on)(Only multi models are effective)
7
Compressor
Running
Frequency Fr
/
8 /
9
Current AC
Voltage Uo
/
10 /
11
press "On/Off" for 2S to enter the Min. Desired Cooling Frequency Selector,
the code displayed is Ch, press "OK" to send the Query Min. Desired Cooling
Frequency Selector code; press the Up/Down key to select the minimum
cooling frequency desired and press "OK" to confirm; press "On/Off" for 2s to
exit.(Range:10-50Hz,--;”--” cancels the Settings)(for some models) (Set within
1 minute after power on)
12
Set Speed Pr of
the outdoor fan
press "On/Off" for 2s to enter the Min. Desired Heating Frequency Selector,
the code displayed is “Ch”, press "OK" to send the Query Min. Desired
Heating Frequency Selector code; press the Up/Down key to select the min.
desired heating frequency value, press "OK" to confirm; and press the "On/
Off" for 2s to exit.(Range:10-50Hz,--;”--” cancels the Settings) (for some
models)(Set within 1 minute after power on)
13 Opening Lr of EEV
press "On/Off" for 2s to enter the Max. Running Frequency Selector of the
restricted area 6 in the cooling mode T4, the code displayed is “Ch”, press
"OK" to send the Query Max. Running Frequency Selector code of the
restricted area 6 in the cooling mode T4; press the Up/Down key to select
the limit, then press "OK" to confirm; and press "On/Off" for 2s to exit.
(Range:20-150Hz,--;”--” cancels the Settings)(for some models)
14
Actual Running
Speed ir of the
indoor fan
/
15
Indoor Humidity
Hu
press "On/Off" for 2s to enter the Outdoor Forced Running Frequency
Selector, the code displayed is “Ch”, press "OK" to send the Query Outdoor
Forced Running Frequency Selector code; press the Up/Down key to select
the outdoor forced running frequency(“10-250Hz“), then press "OK" to
confirm; and press "On/Off" for 2s to exit.(Range:10-250Hz,--;”--” cancels the
Settings)(for some models)
16
Set Temperature
TT after
compensation
press "On/Off" for 2s to enter One-Key Recovery, the code displayed is “rS”,
then press "OK" to send the One-Key Recovery code, the mode selector of the
remote control will recover to "Cooling and heating", the min. temperature
recovers to 16°C, and the max. temperature recovers to 30°C; and press "On/
Off" for 2s to exit.(for some models)
17 nA