4
-
Fabrication Manual
-
A Type: Acrylic Panel Fixing Type
B Type: Acrylic Panel Sliding Type
By creating planes in either A or B type, 3 patterns of simple case creation described below are enabled.
“
Standard Type
”
“
Removable Motherboard Type
”
“
Dual Motherboard Type
”
A+A
A+B
B+B
This is created with combining A+A
type. 4 sides of the acrylic panel are
created by fixing panels around.
This type is recommended for the
users who wish to conduct no
replacements.
By combining A +B type, plug in and out of
the
motherboard is enabled. This is the most
popular creation pattern for Basic series. As
the replacement of motherboard is enabled
easily, this is recommended for the users
who wish to put emphasis on the
maintenance.
This is a double-sided motherboard for
power users, created by combining
B+B type. This perfectly suits to the
narrow places with using 2 units of
PCs.
*When using 2 units of motherboards,
“
LUBIC-SWR2
”
switch is required
separately.
[Work Procedure Overview]
1.
As a preparation for plane creation, mount CAP, CAP-EX on 384mm frame.
2.
Connect CAP mounted 384mm frame created in 1. above, CAP-EX mounted 384mm frame and 256mm frame together.
3.
Complete plane creation.
4.
Build a cubic with connecting the created planes.
Summary of Contents for Lubic-BASIC NE
Page 11: ...11...
