7
[Step3 Work Descriptions: Create planes preventing acrylic from sliding
-
【
B Type
】
Creation-]
[Step3-1]
Connect CAP-EX attached 384mm frame and 256mm frame
with using 3S and fix with SC6M4.
Create other one similarly.
[Step3-2]
Connect CAP-EX attached 384mm frame with the parts
created in [Step3-1]. At this time, connect them with proving a
height difference
. Leave a space for placing a single frame
as shown in the picture above.
Create other one similarly.
[Completion]
Although all 4 corners are fixed, plug in and out of ACMV-AO
is enabled as there is a height difference.
The created plane is hereafter called
【
B Type
】
in the
following description.
[Supplementation]
By creating 2 sheets of
【
B Type
】
,
“
Dual Motherboard Type
”
is now completed described in the
【
Completion Examples
】
at
the end of this document.
【
Parts Used
】
CAP-EX mounted 384mm frame x 1 piece, CAP mounted 384mm frame x 1 piece, 256mm frame x 2 pieces,
ACMB-AO x 1 piece, 3S
ｘ
6 pieces, SC6M4
ｘ
6 pieces
256mm frame
↓
384mm frame
←
384mm frame
→
↑
256mm frame
Summary of Contents for Lubic-BASIC NE
Page 11: ...11...
