13
In
menu 2
, you can enter the halt steps and
the sparking time.
Halt time
(Feeding - halt - feeding)
(min. 10 sec. / max. 300 sec.)
Sparking time (min. 30 sec. / max. 300 sec.)
During halt time, feeding is stopped to reduce
pressure on the knife. After end of feeding
operation the machine runs till end of
sparking time and then stops.
In
menu 3
you can enter the value for drive
backwards and cooling on/off.
Drive backwards value
Cooling on/off
Drive backwards value means, you can
determine how far the machine should move
back at the end of the program.
In
menu 4
you can enter the values of the
engine speed and the sparking time during
the grinding operation.
RPM during grinding
RPM during sparking time
In
menu 5
you can change the rotational
speed of the grinding wheel in m/sec.
Change of rotational direction of the grinding
motor.
Rotational speed in m/sec (basic adjustment
25m/sec)
Setting range from 1 – 42 m/sec
Change of rotational direction grinding motor
right – left
By pressing the arrow key on the right you will return to main menu.
