![background image](http://html1.mh-extra.com/html/kaindl/rms-cnc/rms-cnc_operating-manual_3202943014.webp)
1 4
1 3.
TURNING ON THE MACHINE
Turning off the
machine
Turning on the
machine
Turn on the machine on the right on the lower console by actuating the green switch. The
machine illumination switches on and the control boot the operating system.
NOTE: Always end the controls correctly before turning off the machine!
After the controls boot, you see the start-up display. Two machine configurations are
available:
1 . Kaindl-ROUND:
is a two axes configuration for grinding of circular blades or
inner cylindrical grinding.
2. Kaindl-RMS-CNC:
is a three axes configuration for grinding of punch blades.
NOTE: Every configuration has its own independent program folder
The CNC software EMC2 is started by tapping the respective image.