KAESER SM 8, Service Manual

Page: 34 / 83

Maintenance
9 --- 31
9.2 Regular Maintenance
Interval Work to be done See chapter
2 and 24 h after initial
start Check the v---belt tension 9.4
50 h after initial start Check all electrical connections for tightness
and tighten if necessary
200 h after initial start Replace the run ---in oil filter 9.11
Weekly Check the oil level 9.12
Check the filter mats for contamination 9.6
500 h Check the v---belt tension 9.4
Clean or replace the air filter* 9.7
1000 h Check the oil cooler and air aftercooler for con-
tamination 9.13
Clean or replace the filter mats* 9.6
1000 to 2000 h Replace the oil filter* * 9.11
Proper interval varies.
See chapter 1.8 Change the oil* 9.14
2000 to 3000 h* * Change the oil separator cartridge* 9.15
Annually Check all electrical connections for tightness
and tighten if necessary
Have the safety relief valve checked by
authorized KAESER distributor 9.9
6000/12000 hours or at
least within three years Have the compressor motor bearings relubrica-
ted by autherized KAESER distributors* 9.8
* The maintenance period can vary depending on the cycle rate and environmental
conditions.
* * Not to exceed 2000 service hours.
We urgently recommend that a record is kept of the maintenance work done (see chap-
ter 9.16).