5 Installation and Operating Conditions
5.1 Ensuring safety
The conditions in which the machine is installed and operated have a decisive effect on safety.
Warning instructions are located before a potentially dangerous task.
Disregard of warning instructions can cause serious injuries!
Complying with safety warnings
Disregard of safety warnings can cause unforeseeable dangers!
➤ Strictly forbid fire, open flame and smoking.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or
heat from igniting oil vapors or parts of the machine.
➤ Do not store inflammable material in the vicinity of the machine.
➤ The machine is not explosion-proof!
Do not operate in areas in which specific requirements with regard to explosion protection are
in force.
➤ Ensure sufficient and suitable lighting such that the display can be read and work carried out
comfortably and safely.
➤ Keep suitable fire extinguishing agents ready for use.
➤ Ensure that required ambient conditions are maintained.
Required ambient conditions may be:
■ Maintain ambient temperature and humidity
■ Ensure the appropriate composition of the air within the machine room:
─ Clean with no damaging contaminants (e.g., dust, fibers, fine sand).
─ Free of explosive or chemically unstable gases or vapors.
─ Free of acid/alkaline forming substances, particularly ammonia, chlorine or hydrogen sul‐
fide.
5.2 Installation conditions
5.2.1 Determining location and clearances
The machine is intended for installation in an appropriate machine room. Information on distances
from walls and ventilation is given below.
The distances quoted are recommended distances and ensure unhindered access to all ma‐
chine parts.
➤ Please consult KAESER if they cannot be kept to.
Precondition The floor must be level, firm and capable of bearing the mass of the machine.
5
Installation and Operating Conditions
5.1
Ensuring safety
9_6917 34 USE
Operator Manual Screw Compressor
AIRTOWER 3C–7.5C Tri-Voltage
35
