2. Click in the SIGMA CONTROL 2 display.
The Main menu is displayed.
3. Click the numbered lines.
The system displays the corresponding sub-menus.
4. Press ESC repeatedly to leave this menu.
8.3.3 Graphs menu
When starting the
Graphs menu, the recorded machine data from the last 20 minutes are displayed
as diagram. The system updates the graph every ten seconds whilst the current time is displayed.
If an SD card is provided in the X5 SD card slot, you can retrieve and display the automatically-
recorded machine data for any time in the past.
Moving the mouse pointer across the graph calls up a ruler. The time selected with the ruler and
the associated values are displayed in the legend above the graph. When the ruler is hidden, the
time and associated values are displayed at the right edge of the graph.
The graph content depends on the machine type.
The
Speed display is implemented only for machines with frequency converter.
Precondition KAESER CONNECT for SIGMA CONTROL 2 is displayed.
1. Click the
Graphs menu element.
Fig. 21
Graphs (illustration similar)
2. Check the displayed data.
8
Initial Start-up
8.3
KAESER CONNECT benefits
No.: 901700 14 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
71
