3. Press the «Enter» key.
The current language flashes.
4. Use the «Up» or «Down» key to select the desired language.
5. Press the «Enter» key.
Result The user interface is now displayed in the selected language.
8.2.3 Noting the user name
The number on the reverse side of your RFID Equipment Card is identical to the
username
displayed on the SIGMA CONTROL 2 when you log in successfully with your RFID Equip‐
ment Card.
Fig. 12 Reverse side of the RFID Equipment Card
1
Reverse side of the RFID Equipment Card
2
RFID Equipment Card number
1. Note down the username (= RFID Equipment Card number).
2. Keep the note in a secure location.
Should your RFID Equipment Card get damaged or lost:
➤ If you know your username and password, you can log in to the SIGMA CONTROL 2
manually (see chapter 8.2.5).
8.2.4 Logging in with an RFID Equipment Card
The RFID Equipment Card allows quick and easy log-in to the SIGMA CONTROL 2. It also grants
you advanced access to the functions of the controller.
Advanced access rights allow you to:
■ Read off additional data
■ Change additional settings
Fig. 13 Logging in with an RFID Equipment Card
8
Initial Start-up
8.2
Setting the controller
No.: 901700 14 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
51
