➤ Before starting work on the frequency converter or intermediate circuit capacitors, wait at
least 5 minutes.
➤ Do not open the housing while the machine is switched on.
Further information Information about authorised personnel can be found in chapter 3.4.2.
Information about dangers and their avoidance can be found in chapter 3.5.
6.2 Reporting Transport Damage
1. Check the machine for visible and hidden transport damage.
2. Inform the carrier and the manufacturer in writing of any damage without delay.
6.3 Creating the air connection
Precondition The machine is isolated from the connected compressed air consumers.
Fig. 8 Creating the air connection
➤ Creating the connection to the air main by a flexible pressure line.
6.4 Disconnect the compressed air connection
Precondition The machine is connected to the compressed air consumer.
Fig. 9 Disconnect the compressed air connection
1. Press the hose coupling in the direction of the compressor.
6
Installation
6.2
Reporting Transport Damage
No.: 901731 24E
Operator manual Reciprocating compressor
i.Comp 3
27
Summary of Contents for i.Comp 3
Page 2: ...Original instructions KKW PWPC 2 04 en SBA KOLBEN ANLAGE M 20200310 081012...
Page 6: ...Contents iv Operator manual Reciprocating compressor i Comp 3 No 901731 24E...
Page 8: ...List of Illustrations vi Operator manual Reciprocating compressor i Comp 3 No 901731 24E...
Page 10: ...List of Tables viii Operator manual Reciprocating compressor i Comp 3 No 901731 24E...
