background image

 
   6060560                      

COMPRESSOR 460/60/3 116CFM      

Cu   

                    

┌─

Item Text      

──────────────────────────────────────────────────────────────────┐

 

                    

 COMPRESSOR 460/60/3 116 CFM 150 PSI                                              

 

                    

                                                                                  

 

                    

 Manufacturer: ATLAS COPCO                                                        

 

                    

 Mfr Part No : GA22FF                                                             

 

                    

 Size        : 116 CFM @ 150 PSI                                                  

 

                    

 Add'l Info  : ROTARY SCREW, SINGLE STAGE, OIL INJECTED,                          

 

                    

               AIR COOLED, FULL FEATURE UNIT                                      

 

                    

               WITH INTEGRATED REFRIGERATED DRYER,                                

 

                    

               COMPRESSOR FAILURE DRY CONTACTS.                                   

 

                    

               30 HP,                                                             

 

                    

               460V, 3 PHASE, 60 HZ                                               

 

                    

               40 IN LONG X 31 IN WIDE X 71 IN HIGH 1318 LBS.                     

 

                    

 EACH COMPRESSOR INCLUDES: FOOD GRADE LUBRICANT (GA-FG)                           

 

                    

 AND GENERAL ALARM CONTACTS                                                       

 

                    

└──────────────────────────────────────────────────────────────────────────────────┘

 

Summary of Contents for GA5































Reviews: