KCH Series Hand-type Ultrasonic Plastic Welding Machine
Weihai Kaer Sonic Power Co., Ltd. www.kaer-welder.com [email protected]
- 10 -
seriously.
c. Over high load while starting ultrasonic causes the failure of starting. At this
moment, shorten the delay time to bring the triggering mode under the mode of
advance triggering, or reduce the pressure to lower the starting load.
8. The following cases may be caused by the faults of the transducer system,
especially the acoustic welding head.
a. High no-load current and unstable ultrasonic.
b. Particularly serious heating up of the welding head, and squealing of the
welding head while testing ultrasonic.
c. Constant frequency deviation protection or overload protection; invalid
frequency adjusting.
VII. Special Statement
1. This manual is presented based on Model KCH-800W/28KHz hand-type ultrasonic
welding machine. Part of its framework may not comply with the model you choose.
Therefore, this manual is only for your reference, with your concrete model subject to
the real machine.
2. Weihai Kaer Sonic Power Co., Ltd. reserves the right for interpretation and revision
for this manual. This manual is subject to change without notice.
2010-10-9 Version
Weihai Kaer Sonic Power Co.,Ltd.
Address: No.54, Dalian Road, Torch Hi-Tech Science Park, Weihai city, China
Hotline: 86-631-5690111 Aftersales: 86-631-5623298
Website: http://www.kaer-welder.com E-mail: [email protected]
