background image

12

  |  Kaden Owner’s Manual

6. Operation tips and safety

Operation tips

• 

Do not

 over-cool the room 

temperature. This is not good for  
health and wastes electricity.

•  Keep curtains closed. 

Do not

 let 

sunshine enter the room directly when 
the air conditioner is in operation.

•  Keep the room temperature uniform. 

Adjust the vertical and horizontal 
airflow direction to ensure a uniform 
temperature in the room. Air can’t be 
discharged to the direction of air in.

•  Make sure that the doors and windows 

are tightly closed. Avoid opening doors 
and windows as much as possible to 
keep air conditioning in the room.

•  Clean the air filter regularly. Blockages 

in the air filter reduce dehumidifying 
effects. Clean the air filter at least once 
every two weeks.

•  Ventilate the room occasionally. Since 

windows are kept closed, it is a good 
idea to open them and ventilate the 
room now and then. When starting the 
unit, curtains or windows should be 
closed to prevent the heat/cool leakage.

 CAUTION

Operations for safety and health

1.  The plug must be accessible after the appliance  

is positioned.

2. 

Do not

 use this appliance in the laundry.

3.  If the power cord is damaged, it must be replaced  

by the manufacturers or its service agent in void  
of hazard.

Safety tips 

• 

Do not

 pull out the power cord.

•  Damage to the cord may result in 

serious electric shocks

• 

Do not

 use the air conditioner for other 

purposes except for cooling the room.

• 

Do not

 use the air conditioner for  

other purposes such as drying  
clothes, preserving foods, or  
cultivating vegetables.

• 

Do not

 block the air intake and 

outlet vents. This causes lowered 
performance and irregular operation.

• 

Do not

 insert sticks or other objects into 

these vents as it is dangerous to touch 
the electric components and the fan.

•  Select the most appropriate 

temperature. Pay attention to adjust 
the temperature to suit the conditions. 
Rooms occupied by infants,the elderly, 
or the sick should be kept at an 
appropriate temperature.

• 

Do not

 use heating apparatuses in  

the vicinity. The air conditioner’s  
plastic parts will melt if exposed to 
excessive heat.

• 

Avoid

 exposing the body directly to a 

continuous unidirectional air flow for 
long periods This is not recommended 
for health reasons.

Note

Always wait at least three minutes before switching the air 
conditioner on again after you have switched it off during 
cooling or heating.
 

Please note that the unit is filled with flammable gas 
R32. Inappropriate treatment of the unit involves 
the risk of severe damages of people and material. 

The appliance must be installed, operated and stored in a 
room with a floor area larger than 4m

2

.

Summary of Contents for KW Series

























Reviews: