Kaden KMC R32, Owner'S Manual

Page: 61 / 68

Kaden Owner’s and Controller Manual | 61
4. Operation
Set the current day and time
1. Press the TIMER button for 3 seconds or more. The timer
display will flash.
2. Press the button “+” or “–” to set the day. The selected day
will flash.
3. The day setting is finished and the time setting is ready
to set after pressing TIMER button or if you don’t press a
button in 10 seconds.
4. Press the button “+” or “–” to set the current time.
Press repeatedly to adjust the current time in 1-minute
increments. Press and hold to adjust the current time
quickly.
5. The setting is done after pressing TIMER button or if you
don’t press a button in 10 seconds.
Remote signal receiving function
The wired controller can be a remote signal receiving device,
you can use the wireless remote controller to control the
air-conditioner through the wired remote controller when the
system has been powered on.
To start/stop operation
To set the operation mode
Mode setting
Press the MODE button to set the mode.
Room temperature
Press the button “+”or “–” to set the room temperature. Indoor
Setting Temperature Range: 17~30ºC.
Fan speed setting
Press the FAN SPEED button to set the fan speed.(This button
does not work when in Auto or Dry mode.)
TIMER
TIMER
TIMER
FAN SPEED
MODE
POWER
ex. Monday AM 11:20
Lower Higher
Press the POWER button
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit