Kaden KMC R32, Owner'S Manual

Page: 45 / 68

Kaden Owner’s and Controller Manual | 45
3. Handling the
remote controller
Not sure what a function does?
Refer to the How to use basic functions and How to use advanced functions sections of this manual for a detailed description
of how to use your air conditioner.
Your air conditioning unit comes with two AAA batteries.
Put the batteries in the remote control before use:
1. Remove the back cover from the remote control,
exposing the battery compartment.
2. Insert the batteries, paying attention to match up
the (+) and (-) ends of the batteries with the symbols
inside the battery compartment.
3. Install the back cover.
The remote controller can be attached to a wall or stand by
using a remote controller holder.
1. Before installing the remote controller, check that the
air conditioner receives the signals properly.
2. Install the holder with two screws.
3. Put the remote controller in the holder.
Battery notes
For optimum product performance:
• Do not mix old and new batteries, or batteries of
different types.
• Do not
leave batteries in the remote control if you don’t
plan on using the device for more than 2 months.
• The remote control must be used within 8 meters of
the unit.
• The unit will beep when remote signal is received.
• Curtains, other materials and direct sunlight can interfere
with the infrared signal receiver.
• Remove batteries if the remote control will not be
used more than 2 months.
Battery disposal
Do not dispose of batteries as unsorted municipal waste.
Refer to local laws for proper disposal of batteries.
Inserting and replacing batteries Tips for using remote control
Installing remote control holder