Kaden KMC R32, Owner'S Manual

Page: 27 / 68

Kaden Owner’s and Controller Manual | 27
Operating temperature
When your air conditioner is used outside of the following temperature ranges, certain safety protection features may activate and
cause the unit to disable.
Inverter split type
COOL mode HEAT mode DRY mode
Room temperature 17°C – 32°C 0°C – 30°C 10°C – 32°C
Outdoor temperature -15°C – 50°C -15°C – 24°C 0°C – 50°C
When outside temperature is below 0°C we strongly recommend keeping the unit ‘powered’ to ensure smooth
ongoing performance.
NOTE: If the air conditioner is operating in a room where the relative humidity of the room is less than 80%, the surface of the air
conditioner may attract condensation. Please sets the vertical air flow louvre to its maximum angle (vertically to the floor), and set
HIGH fan mode.
To further optimise the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
•
Do not
block air inlets or outlets.
• Arrange for a qualified service technician to inspect and clean the air filters seasonally.
Do not
do it yourself; it can
be dangerous.
Other features
Default setting
When the air conditioner restarts after a power failure, it will
default to the factory settings (AUTO mode, AUTO fan, 24°C.
This may cause inconsistencies on the remote control and unit
panel. Use your remote control to update the status.
Auto-restart
In case of power failure, the system will immediately stop.
When power returns, the Operation light on the indoor unit
will flash. To restart the unit, press the
ON/OFF button on the
remote control. If the system has an auto restart function, the
unit will restart using the same settings.
Three-minute protection feature
A protection feature prevents the air conditioner from being
activated for approximately 3 minutes when it restarts
immediately after operation.
Louvre angle memory function
Some models are designed with a louvre angle memory
function. When the unit restarts after a power failure, the angle
of the horizontal louvres will automatically return to the previous
position. The angle of the horizontal louvre should not be set
too small as condensation may form and drip into the machine.
To reset the louvre, press the manual button, which will reset
the horizontal louvre settings.
Refrigerant leak detection system
In the event of a refrigerant leak, the LCD screen will display
“EC” and the LED indicator light will flash.