Page
10
hy-switch for KACO blueplanet hybrid inverters
3.1. Proper use
The component is intended for indoor applications and may only be used in
countries for which it has been approved or for which it has been released by
KACO new energy and the grid operator.
Operate the component only with a permanent connection to the public power grid.
The country and grid type selection must be commensurate with the respective
location and grid type.
The requirements of the grid operator must be met for grid connection to take
place. The permission of the relevant authorities may also be required in order
to secure authorisation to connection to the grid.
The enclosed documentation is an integral part of the component. The
documentation must be read, observed and stored in a place which is freely
accessible at all times.
The name plate must be permanently attached to the component.
Any other or additional use of the device shall be regarded as
improper.
This includes:
–
Use without a blueplanet hybrid inverter
–
Mobile use
–
Use in rooms where there is a risk of explosion
–
Outdoor use
–
Operation outside the specification intended by the manufacturer
–
Modification of the component
