Configuration and Operation
Page 48
Operating instructions KACO blueplanet 50.0 TL3 S/Basic/M/XL
EN
EN
by the web server is adapted dynamically to the pre-set language preferences in your Internet browser. If your Inter-
net browser requests a language that is unknown to the inverter, the web server uses the menu language set in the
inverter.
Setting up the web server
Configuring the Ethernet interface
ඣ
You have connected the inverter to your network.
"
When using a DHCP server: Activate DHCP.
"
For manual configuration (DHCP off ):
1.
Open the Settings/Network menu.
2. Assign a unique IP address.
3. Assign a subnet mask.
4. Assign a gateway.
5. Assign DNS server.
6. Save your settings.
Using the web server
To avoid problems with incompatibility, use the most recent version of your Internet browser. JavaScript must be
enabled in the browser settings to display the web server correctly.
NOTE
You can also access the web server of the inverter via the Internet. To do this, additional settings of
your network configuration, particularly your Internet router, are required. Note that communication
with the inverter is carried out over an unsecured connection, particularly in the case of a connec-
tion over the Internet.
Calling up the web server
ඣ
Configure the Ethernet interface.
ඣ
Connect the Ethernet cable.
1.
Open an Internet browser.
2. In the address field of the Internet browser, enter the IP address of the inverter and open the site.
»
The Internet browser displays the start screen of the web server.
After it has opened, the web server displays information about the inverter as well as the current yield data. The web
server enables the following measurement data and yield data to be displayed:
•
Feed-in power
•
Generator power
•
Status
•
Generator voltage
•
Grid power
•
Unit temperature
•
Grid voltage
In order to display and export yield data, proceed as follows:
Select the display period
1.
Open the web server.
2. Select the display period by choosing either daily view, monthly view, yearly view or overview.
Filtering display data (daily view only)
1.
Open the web server.
2. Select daily view.
3. To show or hide measurements, select or deselect the corresponding checkboxes in the “Choose view” area.
Summary of Contents for blueplanet 50.0 TL3 S
Page 2: ...The copyright for these operating instructions is held solely by KACO new energy GmbH...
Page 66: ......
Page 67: ......
