Kaco blueplanet 50.0 TL3 S, Operating Instructions Manual

Page: 47 / 68

Configuration and Operation
Operating instructions KACO blueplanet 50.0 TL3 S/Basic/M/XL Page 47
EN
Country-spec.
Setting
Menu
level
Display/setting Action in this menu/meaning
All countries
4 1 2 3 4 "Information" menu
"
Open the menu: Press the right arrow button or
the OK button.
4 1 2 3 1 Inv. type
Displays the type designation of the inverter.
If feed-in power is actively limited: display maximum
power in kW.
4 1 2 3 1 SW version Displays the installed software version.
4 1 2 3 1 Serial number Displays the serial number of the inverter.
4 1 2 3 1 Display country
Displays the selected country setting. Optional: Dis-
plays the grid type if a grid type has been selected.
4 1 2 3 4
“Manufacturer”
menu
The display shows information about the unit manu-
facturer.
NOTE
Please refer to the application note “APL_Software_Function_Description” on our website for more
information about individual menu functions.
8.4 Inverter monitoring
The inverter has an integrated web server. This makes it possible to monitor and record the operating state and yield
of your PV system.
You can display the recorded data using:
• The integrated LCD
• The integrated web server using an Internet-capable device connected to the Ethernet interface of the inverter
• A storage medium connected to the USB interface, for example, a USB stick.
8.4.1 USB interface
Use an external USB storage device to read operating data saved in the inverter.
Reading log data
NOTE
The USB interface is approved solely for use with USB flash storage devices (“USB sticks”). The max-
imum available current is 100 mA. If a device with a higher power requirement is used, the power
supply for the USB interface automatically shuts down to protect the inverter from damage.
Reading data
1. Connect a suitable USB storage device to the USB interface on the communication circuit board.
2. Open the “Log data display” menu.
3. Select the “Save to USB” item.
4. Select the desired log data using the 4-way button.
5. Press the Enter button.
» The inverter saves the selected log data to the USB storage device.
8.4.2 Web server
The inverter has an integrated web server. After configuring the network and activating the web server in the Set-
tings menu, you can open the web server from an Internet browser. The language version of the website delivered