■
Normal Inner Pads
*Packaged
●
Improves air intake
Front
Inner Pad
(Front)
Inner Pad
(Top)
Chinstrap
Chinstrap
Replacing Normal Inner Pads
Two pads (5mm/10mm) of different thickness are
packaged standard. Change them in order to achieve
a better fit if necessary.
Securely attach the inner pads to the hook-and-loop
fasteners inside the helmet, as indicated in the
figure.
Normal Inner Pads
Attach linings correctly.
Otherwise, the helmet may be uncomfortable.
Please refer to Parts List on our
website for more information about
replacement.
http://www.ogkkabuto.com
Linings used every day will wear out over time. Continuing
to use worn linings may lead them to break and cause
poor fit. Old linings should be replaced at an early stage.
Linings wear out over time!
How to Clean Linings
Replacement “WG-1 Linings”
Linings are removable and washable. Keep linings clean by washing periodically. Use warm water (35ºC/95ºF or cooler)
with small amount of hair shampoo or ph-neutral detergent. Hand wash them gently and rinse thoroughly. Dry linings with
a dry cloth after washing, and leave them in a shaded and well-ventilated place. Avoid direct sunlight.
* See Page17 for MOFF cleaning
Contact the shop you purchased the helmet when you purchase a
replacement linings. Make sure the model of your helmet.
8
Remember!
Warning!
Warning!
