Please refer to Parts List on our website for more information
about replacement.
http://www.ogkkabuto.com
Replacement TRIFIT Adjuster is
available.
Replacement TRIFIT Adjuster
Every adjuster of KABUTO, including TRIFIT Adjuster is designed exclusively for a
particular model. Be sure to purchase a replacement adjuster compatible with your helmet.
Replacement “TRIFIT Adjuster”
Detach/ Attach TRIFIT Adjuster
■
Attach
Push the pins at the both edges of the arm into the basket
holes. Then place the fourth hole over the mounting projection
at the rear, and slide into it by pushing. (Fig. 4) After attaching,
make sure the chinstraps are placed in the position as
indicated in (Fig. 5) .
■
Adjusting TRIIFIT Adjuster Angle (low, mid or high)
Hold near the base of TRIFIT Adjuster and slide it up or down
(low, mid or high) to adjust the angle. (Fig. 2)
The forth bigger hole at the bottom is used to detach/ attach
TRIFIT Adjuster (Fig.3). Make sure to change the angle
carefully, or the adjuster will be detached from the fourth hole.
The fourth hole
A
B
C
Fig. 2
Fig. 3
TRIFITAdjuster
TRIFITAdjuster
Mounting part
Mounting part
Fig.4
Chinstrap
position
Chinstrap
position
Fig.5
When adjusting the angle of TRIFIT Adjuster, make sure to
hold near the base of the adjuster. Do not force or twist the
adjuster as this may break the adjuster.
■
Detach
Hold the bottom of TRIFIT Adjuster mounting part and slide to
the fourth bigger hole as indicated in (Fig.3) . Then hold the
base of the arm mounting part securely and pull gently. By
doing so with the both arms, the Adjuster will be removed.
6
Adjustable
at 3 angles
Place the
fourth hole
over the
mounting
projection
Place the
fourth hole
over the
mounting
projection
Warning!
Warning!
