ENG-23
– How to remove Wind Shutter-2 –
Firmly hold the interlining area around the
center of the Wind Shutter-2 and pull it up.
Then the Wind Shutter-2 will be removed.
– Detaching –
Grip the Breath Guard-5 securely, and pull
it out to remove it.
– Attaching –
As shown in the figure, set the center of
the Breath Guard-5 onto the center of the
helmet, and push in the Breath Guard
between the shield rubber trim and the
chin liner.
The Breath Guard-5 may be detached or
attached according to your needs.
CAUTION!
CAUTION!
To remove the Wind Shutter-2,
gently pull up and take off carefully.
Otherwise the cloth and/or a part
may be damaged.
Do not use an adhesive agent but
follow the procedure given above to
attach the Breath Guard-5. Some
components of an adhesive agent
may damage the material of the
helmet.
Wind
Shutter-2
Hold the interlining
around the center
and pull it up.
14
Remove/Replace Breath Guard-5
Breath
Guard-5
Breath
Guard-5
Shield rubber
trim
Chin liner
Shield
rubber
trim
center of the helmet
insert in-
between
ENG
Summary of Contents for Japan RT33
Page 29: ......
