Kabuto Japan RT33, Instruction Manual

Page: 13 / 29

ENG-11
7
Remove/Replace of shield Ratchets
The “Shield Ratchet” is a part to control the open/close the shield and the function of
the “Single Action Shield System
PATENTED
”.
When the shield is completely removed in the procedure mentioned in 6 “Single
Action Shield System
PATENTED
”, the Shield Ratchet appears.
1. First, check the side of the
Shield Ratchet as shown in
Fig.1.
– How to remove the Shield Ratchet –
– How to install the Shield Ratchet –
Turn the Shield Ratchet Screws on
the Shield Ratchet counterclockwise
using a proper sized screwdriver
until the screws are removed. Then,
the shield ratchet can be removed.
Follow the same procedure to
remove the Shield Ratchet on the
other side.
Shield Ratchet Screw
Shield Ratchet
Proper sized
screwdriver
CAUTION!
•Use the proper sized screwdriver to remove the Shield Ratchet Screws. Turn
the screw by applying the screwdriver vertically to the screw. If the improper
sized screwdriver is used or the screw is turned diagonally, the threads may be
stripped.
•Do not lose the removed screws.
Fig.1
Shield Ratchet
Right Left
ENG